FC125-240 Series

FC125 Operating Specifications

• Operating fluid pressure range: 0 to 172 kPa ( 0 to 25 psig) @ 80°C (176°F)
• Operating fluid temperature range: 1 to 80°C (33 to 176°F)
• Maximum Pressure differential on tubing: 35 kPa (0 to 5 psid) @ 80°C (176°F)
• Negative pressure differential will collapse tubing and must be avoided
• Storage temperature range: -30 to 60°C (-22 to 140°F)

FC125 Materials of construction

• Housing – Shell –Polypropylene
• End caps – GE Noryl Seals – EPDM (peroxide cured)
• Tube bundle headers – Thermoset polyurethane
• Membrane tubing – Nafion™ polymer

IMPORTANT – WARNING! Due to differing rates of expansion, metal fittings are not recommended. ABS or Nylon fittings are recommended. Additionally, DO NOT USE a thread sealant compound when attaching fittings to Perma Pure humidifiers, it is chemically incompatible with the assembly, leading to leaks (and voiding the warranty). Use Teflon tape instead.

FC 125 Dimensions

Housing material: Polypropylene

Model Number	A	B	C	D	Flow Rate (slpm)
					Gas-to-Gas			Water-to-Gas
					Approach Dew Point Temp.*			Flow vs Dewpoint
					4 deg C	6 deg C	9 deg C
FC125-240-5MP	7.9″	5″	4.6″	2.90″	13 slpm	30 slpm	40 slpm
FC125-240-7MP	9.9″	7″	6.6″	4.90″	18 slpm	42 slpm	56 slpm
FC125-240-10MP	12.9″	10″	9.6″	7.90″	25 slpm	60 slpm	80 slpm

* The performance information for the gas-to-gas units are expressed as the flow rate of air (slpm) in relation to the approach dew point temperature. The approach temperature is defined as the difference between the cathode exhaust stream entering the humidifier and the humidifier exhaust stream going to the stack. For example, with a FC125-240-5MP, if the cathode exhaust dew point entering the humidifier is 67° at 30 slpm, the humidifier generates an output dew point of 61°C (approximately a 6°C difference from the cathode exhaust dew point).