MiniGASS-2812 Portable Sampling System

Portable MiniGASS 2812 Gas Sampling System

MiniGASS-2812

Further Information:

Perma Pure’s Only Complete Portable Heated Gas Sample Conditioning System

Our Portable Mini-GASS™ systems prepare hot gas sample streams for high performance gas analysis, designed for stack testing and intermittent use. Includes carrying case.

Many gas analyzers suffer performance degradation and maintenance problems due to clogging and corrosion when water or water vapor reaches the equipment. Mini-GASS systems remove water to well below the condensation point, typically providing dew points as low as -25C.

Mini-GASS units offer several options and configurations, including mounting directly on the stack so very little heated line is used. For explosive environments, a Class I, Division II version is available. An automatic drain installed on the filter will remove acid mists. A sample pump can be incorporated to make a completely self-contained system.

Mini-GASS systems are ideal for process and continuous emissions monitoring (CEMS) applications. They are designed to process highly corrosive and difficult samples including gas streams containing high levels of HCl, HF, NOx or SOx.

Features include:

  • 28″w x 12″h x 7″d fiberglass enclosure w/transparent cover
  • Handle and carrying case
  • 1/4″  inlet compression fitting and heat-shrinkable conduit for heated sample line
  • PID temperature controller with digital display
  • Purge gas flowmeter, pressure regulator and pressure gage
  • System ready/alarm outputs
  • Corrosion-resistant coalescing filter; borosilicate fiber in Teflon™ binder element 1 µm absolute porosity
  • Calibration gas inlet port
  • NEMA / Type 4X rated
  • CE Mark approved

MiniGASS Intelligent Product Numbering System

part-numbers-mg-2812-series

1 – Voltage
115 VAC, 50/60 Hz 1A
230 VAC, 50 Hz 2A
2 – Wetted Material / Inlet Type
Fluorocarbon F
Stainless Steel S
3 – Filter Drain
Manual drain valve assembly, for vacuum drain, includes a Teflon eductor with 0.040″ Teflon nozzle and a Polypropylene check valve to prevent backflow V
Manual drain valve assembly, for pressure drain (not available in Kynar), includes a Toggle valve to manually drain coalesced liquids P
4 – Dryer (Required Option)
50 tube Nafion™ gas dryer, 24″ long, Small dryer for LOW sample flow rates (1 lpm or less) 05
100 tube Nafion™ gas dryer, 24″ long; Medium dryer for MODERATE sample flow rates (2-3 lpm) 10
200 tube Nafion™ gas dryer, 24″ long; Large dryer for HIGH sample flow rates (4-6 lpm) 20
5 – Purge Air Dryer or Sample Pump
Heatless dryer for purge air; req’d when instrument air is unavailable HD
Sample pump, 5 LPM P
6 – Purge Eductor
Req’d when sample is under vacuum of more than 5″ of water; prevents collapse of dryer tubing by reducing pressure of the purge air ED

Perma Pure MiniGASS 2812 Spare Parts

ITEM # Description
MG-DTC Digital temperature controller, single channel
MG-TCS Thermocouple
MG-SSR Solid state relay
MG-FM Flow meter, purge gas (0-60 L/min)
MG-PR Pressure regulator, purge gas or eductor
MG-DPS Differential pressure switch
MG-PG-0-30 Pressure gage, purge gas (0-30 PSI)
MG-VG-0-60 Vacuum gage, purge eductor (0-30″Hg)
SV-K10 Safety interlock solenoid valve, Kynar, 110V/60Hz
SV-K20 Safety interlock solenoid valve, Kynar, 220V/50Hz
FF-DCV Drain check valve, Teflon, for vacuum drain
DVV-B10 Drain solenoid valve, brass, for vacuum drain 110V/60Hz
DVV-B20 Drain solenoid valve, brass, for vacuum drain 220V/50Hz
DVP-K10 Drain solenoid valve, Kynar, for pressure drain 110V/60Hz
DVP-K20 Drain solenoid valve, Kynar, for pressure drain 220V/50Hz
MG-DVT Drain valve timer
MG-DC Mounting clamps for dryer (specify dryer model)
MG-HB200T Heater blocks for PD-200T, 1 pair
MG-1412-HB Backplate with heater for enclosure 1412
MG-2112-HB Backplate with heater for enclosure 2112
PD-50T-24E 50 tube dryer replacement element, 24″ long, includes o-rings
PD-100T-24E 100 tube dryer replacement element, 24″ long, includes o-rings
PD-200T-24E 200 tube dryer replacement element, 24″ long, includes o-rings
FF-250-E-2.5G Replacement filter element
FF-250-G Replacement glass shell
FF-250-3 Replacement o-ring set, set of 3
AS-200-08-EB Media replacement for ammonia scrubber, bulk supply, 5 fillings
MG-PUMPKIT Pump repair kit, Teflon diaphragm