Baldwin 8210 Classic Series Thermoelectric Gas Sample Cooler

Baldwin 8210 Classic Series Thermoelectric Cooler

Perma Pure has upgraded this product to include a digital control board. Please visit our Digital Gas Coolers page to learn more.  Spare parts are available

ClassicCool_150x150

Further Information:

Accessory Information:

Perma Pure’s Baldwin-Series Classic Model 8210 thermo-electric cooler is specifically designed for high ambient temperature and high water volume applications. The Model 8210 features an oversized heat sink and high performance thermoelectric devices for high heat removal capacity. Heat sinks used in the Baldwin-Series thermo-electric coolers are made out of high heat transfer extruded aluminum with large ¾” thick end plates. The Model 8210 incorporates a special controller specifically designed to run at high ambient temperatures up to 110°F (43°C).

Features:

  • 4-10 lpm (8.5-21.2scfh); 248 Btu/Hr
  • Dual channel system
  • (2) active impingers, 10″ long in series or parallel (select material below)
  • LED temperature display
  • 100-120 VAC/ or 200-240 VAC, 50/60 Hz voltages
  • 14.6″ x 12.6″ x 11.8″; 35 lbs
  • Dual head peristaltic drain pump required but not included
  • Water slip and alarm relay board
  • CE Mark

8210 Series Cooler Specifications

Dimensions 11 x 10 x 10 in. HWD – 28 x 25 x 25 cm
Weight 15 lbs – 6.8 kg
Maximum Inlet Sample – Temperature 392°F (200°C) SS, Glass Impingers 280°F (138°C) Kynar™ Impinger
Maximum Inlet Pressure 45 psig – 3 bar / 2250 mmHg
Maximum Heat Exchanger Pressure Drop <+1 in. H2O
Ambient Temperature Range 33-104°F – 0.6-40°C
Outlet Sample Gas Dew Point 41°F – 5°C
Inlet Tubing Connection ⅜ in. FNPT
Outlet Tubing Connection ¼ in. FNPT
Drain Tubing Connection ⅜ in. FNPT
Voltage 110 (220 optional) VAC – 50/60 Hz

8210 Series Cooler Intelligent Product Numbering System

part-numbers-baldwin-8210-Series

1 – Voltage
115 VAC, 50/60 Hz 1A
230 VAC, 50 Hz 2A
2 – Impingers (Required Option)
(2) 10″ Stainless Steel, EZ Clean Twist-Apart Impingers ES
(2) 10″ Glass Impingers, threaded with fittings G
(2) 10″ Kynar Impingers K
(2) 10″ Stainless-Durinert coated, EZ Clean Twist-Apart Impingers ED
3 – NJ Thermocouple
Stainless Steel Impingers Only
(1) New Jersey thermocouple temperature sensor, series configuration T1
(2) New Jersey thermocouple temperature sensor, parallel configuration T2
4- Water Slip Sensor
Water slip sensor with inline flow holder; 1/4″ Kynar tube fittings, series configuration WS
(2) Water slip sensors with inline flow holder; 1/4″ Kynar tube fittings, parallel configurarion WP

Baldwin 8210 Series Cooler Recommended Accessories

ITEM # Description
3KPB-003 Peristaltic pump, dual head, 115 VAC, complete with enclosure
3KPB-004 Peristaltic pump, dual head, 230 VAC, complete with enclosure

Baldwin 8210 Series Cooler Spare Parts

ITEM # Description
3KPB-000 Pump Peristaltic, No Heads
2PBM-001 Peristaltic pump, motor only, 115 VAC 60 Hz
2PBM-002 Peristaltic pump, motor only, 230 VAC 50 Hz
2PBM-003 Peristaltic pump, head only, standard
2PBT-002PK Peristaltic pump, tubing, norprene, size 17 (10 feet)
2PBM-006 Dual head hardware kit
3CXD-022 Impinger, 10″ EZ-Clean twist-apart, SS Durinert+ coated
3CXD-024 Impinger, 10″ NJ, EZ-Clean twist-apart, SS Durinert+ coated
3CXG-002 Impinger, 10″ glass, threaded with fittings
3CXK-003 Impinger, 10″ Kynar
3CXS-022 Impinger, 10″ SS, EZ-Clean twist-apart
3CXS-024 Impinger, 10″ NJ, EZ-Clean twist-apart, SS
0PTC-003 Paste,Thermal,Compound,2 Oz.Tube
3CCB-011 Control board, Dual channel
3CCB-005 Relay board, dual channel
3CWH-002 Wire Harness, 6 Pin, 6 wire, Dual Terminal
1PSD-035 Power supply, 600 W, 15VDC
1TTC-001 Thermocouple, temperature control, type K, 24″
2FAN-005 Fan, muffin, 4″ x 1″, 12VDC
2FAN-007 Fan, muffin, 6″ x 1-1/2″, 120VAC
2FAN-008 Fan, muffin, 6″ x 1-1/2″, 230VAC
3KPE-004 Peltier element kit, 40 mm, single TE
3CWS-001 Water slip sensor only with 18″ lead and male connector
3KCW-002 Water Slip Sensor w/conn.
4C-NJ/K NJ Thermocouple Retrofit; for 1 Impinger