Baldwin 5210 Classic Series Thermoelectric Gas Sample Cooler

Baldwin 5210 Classic Series Thermoelectric Cooler

ClassicCool_150x150

Further Information:

Accessory Information:

Perma Pure’s Baldwin-Series Classic Model 5210 thermo-electric cooler is specifically designed for high ambient temperature and high water volume applications. The Model 5210 features an oversized heat sink and high performance thermoelectric devices for high heat removal capacity. Heat sinks used in the Baldwin-Series thermo-electric coolers are made out of high heat transfer extruded aluminum with large ¾” thick end plates. The Model 5210 incorporates a special controller specifically designed to run at high ambient temperatures up to 110°F (43°C).

Features:

  • 3-8 lpm (6.4-17scfh); 440 Btu/Hr
  • Single channel system
  • (1) passive, (1) active impinger, 10″ long in series only (select material below)
  • LED temperature display
  • 100-120 VAC/ or  200-240 VAC, 50/60 Hz voltages
  • 14.6″ x 11″ x 10.6″; 27 lbs
  • Dual head peristaltic drain pump required but not included
  • Water slip and alarm relay board
  • CE Mark

5210 Series Cooler Specifications

Sample gas flow Up to 8 LPM Up to 17 SCFH
Average inlet dew point at rated flow 20% H2O (60°C DP) @ 5 LPM
Dimensions 14.55 x 11.12 x 10.57 in. HWD – 37 x 28 x 26.5 cm
Weight 27 lbs – 12 kg
Maximum inlet sample temperature 400°F (205°C) SS, glass impingers 280°F (138°C) Kynar impingers
Maximum inlet pressure 15 psig – 1 bar
Maximum heat exchanger pressure drop +1 in H2O
Ambient temperature range 33-110°F – 0.6-43°C
Outlet sample gas dew point 41°F – 5°C
Inlet tubing connection 3/8 in. compression
Outlet tubing connection 1/4 in. compression
Drain tubing connection 1/4 in. barb
Voltage 115/230 VAC – 50/60 Hz
Power supply 250 Watts
Startup time Less than 3 minutes

5210 Series Cooler Intelligent Product Numbering System

part-numbers-baldwin-5210-Series

1 – Voltage
115 VAC, 50/60 Hz 1A
230 VAC, 50 Hz 2A
2 – Impingers (Required Option)
(2) 10″ Stainless Steel, EZ Clean Twist-Apart Impingers ES
(2) 10″ Glass Impingers, threaded with fittings G
(2) 10″ Kynar Impingers K
(2) 10″ Stainless-Durinert coated, EZ Clean Twist-Apart Impingers ED
3 – NJ Thermocouple
Stainless Steel Impingers Only
New Jersey thermocouple temperature sensor; lead wires only NJ
4- Water Slip Sensor
Water slip sensor with inline flow holder; 1/4″ Kynar tube fittings WS

Baldwin 5210 Series Cooler Recommended Accessories

ITEM # Description
3KPB-003 Peristaltic pump, dual head, 115 VAC, complete with enclosure
3KPB-004 Peristaltic pump, dual head, 230 VAC, complete with enclosure

Baldwin 5210 Series Cooler Spare Parts

ITEM # Description
3KPB-000 Pump Peristaltic, No Heads
2PBM-001 Peristaltic pump, motor only, 115 VAC 60 Hz
2PBM-002 Peristaltic pump, motor only, 230 VAC 50 Hz
2PBM-003 Peristaltic pump, head only, standard
2PBT-002PK Peristaltic pump, tubing, norprene, size 17 (10 feet)
2PBM-006 Dual head hardware kit
3CXD-022 Impinger, 10″ EZ-Clean twist-apart, SS Durinert+ coated
3CXD-024 Impinger, 10″ NJ, EZ-Clean twist-apart, SS Durinert+ coated
3CXG-002 Impinger, 10″ glass, threaded with fittings
3CXK-003 Impinger, 10″ Kynar
3CXS-022 Impinger, 10″ SS, EZ-Clean twist-apart
3CXS-024 Impinger, 10″ NJ, EZ-Clean twist-apart, SS
0PTC-003 Paste,Thermal,Compound,2 Oz.Tube
3CCB-010 Control board, single channel
3CCB-004 Relay board, single channel
1PSD-035 Power supply, 600 W, 15VDC
2FAN-005 Fan, muffin, 4″ x 1″, 12VDC
2FAN-004 Fan, muffin, 4″ x 1-1/2″, 12VDC
3KPE-004 Peltier element kit, 40 mm, single TE
1TTC-001 Thermocouple, temperature control, type K, 24″
3CWS-001 Water slip sensor only with 18″ lead and male connector
3KCW-002 Water Slip Sensor w/conn.
0PTC-003 Paste,Thermal,Compound,2 Oz.Tube
4C-NJ/K NJ Thermocouple Retrofit; for 1 Impinger