Continuous Emissions Monitoring

Sample-Conditioning Solutions

We offer coolers and integrated cooler-based systems, the industry standard for CEMS sample conditioning.

Need  to reduce CEMS maintenance costs, increase reliability in challenging operating conditions, or measure low levels of water-soluble analytes? Our Nafion tubing-based sample conditioning systems are the answer. ​

Nafion™ Tubing-Based Sample Conditioning Systems

Where a cooler-based sample conditioning system falls short, a Nafion™ tubing-based system is the answer. These systems use Nafion™ tubing instead of a cooler to dry the gas sample.

Read more about the advantages of Nafion™ tubing-based sample conditioning systems:

Nafion™ tubing-based sample conditioning systems have better drying performance over cooler based systems. This means less acid deposit build-up and corrosion in your analyzer, and maintenance that’s predictable.

In challenging operating conditions, cooler-based systems may be slow to adapt, or fail, causing excess water and acid to enter the optical bench of the analyzer. Repairs in these instances can cost over $30,000 and months of downtime. OurNafion™ tubing dryers remove more water than coolers, are corrosion-resistant, and have greater fault tolerance, making our Nafion™ tubing-based sample conditioning systems the cost-effective choice for challenging environments.

Coolers dry a gas sample by chilling the sample to condense-out the water. Water-soluble analytes can be lost in this process of water removal. Avoid a non-result with a Nafion™ tubing – based system, which removes water in the vapor phase, keeping water-soluble analytes in the sample, and keeping your system compliant.

Our most comprehensive system with the most drying capacity. Built for the most problematic applications.

Dries to dew points as low as -25 °C

Input Gas:
– Flow rates up to 25 lpm
– Up to 70% water by volume

Suggested for gas samples containing high sulfur and high ammonia.

Smaller version of the GASS 2040, built for problematic applications and lower flow rates.

Dries to dew points as low as –45 °C

Input Gas:
– Flow rates up to 10 lpm
– Up to 50% water by volume

Suggested for gas samples containing high sulfur and high ammonia.

Lowest-cost Nafion ™ tubing system designed to replace coolers.

Dries to dew points as low as -25 °C

Input Gas:
– Flow rates up to 5 lpm
– Up to 50% water by volume

Suggested to replace cooler-based systems to lower CEMS maintenance costs.

Built for environments without access to clean or dry instrument air.

Dries to dew points as low as -5 °C

Input Gas:
– Flow rates up to 5 lpm
– Up to 50% water by volume

Baldwin Cooler Solutions

Coolers dry a gas sample by chilling the sample to condense-out the water.

Today, coolers are used to condition gas samples in over 90% of CEMS installations—they are a widely proven technology.

Our Baldwin Coolers are the industry standard for reliability and have been further improved by digital control.

For an integrated sample conditioning solution, see our Baldwin Sample Conditioning Systems.

The industry standard for quality and reliability.

Dries to dew points as low as + 4 °C

Input Gas:
– Flow rates up to 20 lpm
– Up to 50 % water by volume

Assembled and tested as a complete sample conditioning system.

Dries to dew points as low as + 4 °C

Input Gas:
– Flow rates up to 20 lpm
– Up to 50% water by volume

This is a complete system – containing: a peristaltic pump, a sample pump, in-line filters, and flow meters.

Combines Nafion™ based drying technology with the functionality of a traditional thermoelectric cooler.

Dries to dew points lower than 0 °C

Input Gas:
– Flow rates up to 5 lpm
– Up to 40% water by volume

The patented mechanical design is ideal for locations that have limited or no access to power or other areas where a nonelectric product may be desirable.

Probes, Gas Conditioning Accessories, Spare Parts and Maintenance

Ammonia and acid scrubbers, high-capacity filters, heatless dryers and a range of accessories for sample conditioning systems.

Simple and compact solutions for the control of sample and calibration gases.

Probes for cold extractive and dilution methods.

View common spare parts and maintenance items.

Can’t find what you need?

Application Support

Contact our Application Support Team with questions about your application.

Custom Solutions

Learn more about working with Perma Pure to meet your gas drying, humidifying, and conditioning needs.